Basic Function of an Oscilloscope
This java applet shows the basic functions of an oscilloscope.
The oscilloscope is an electronic instrument widely used in
making electrical measurements.
The main component of the oscilloscope is the cathode ray tube (CRT).
The CRT is a vacuum tube in which electrons are accelerated and deflected
under the influence of electric field.
The electrons are deflected in various directions by two sets of plate
placed at right angle to each other in the neck of the tube.
Signal for the horizontal deflection plate (X-axis) is generated by the scope
It mathematic form is Fx(t)= C t + D (default)
C : time scale
D : horizontal offset
The external signal (need to be measured)
is applied to the vertical deflection plate (Y axis).
The default form for this java applet is Fy(t)= A sin(w t + B)
You can change X or Y axis signal to either kind of signal.
It can be operated in different mode
X = C t + D | X = A sin( w t + B) | |
Y = A sin(w t + B) | default mode | Lissajou's figure |
Y = C t + D | not supported for an oscilloscope |
For parameter B please enter value in degree.
Any suggestion? hwang@phy03.phy.ntnu.edu.tw
last modified ĄG